Ubiquiti EP-S16 Edge Point WISP Control Point

Ubiquiti EP-S16 Edge Point WISP Control Point

The Ubiquiti EdgePoint EP-S16 WISP Control Point is an intelligent WISP Control Point with FiberProtect. The EdgePoint EP-S16 is a layer 2 switch with some layer 3 capabilities. The Ubiquiti EdgePoint EP-S16 features 16 RJ45 Ethernet ports and two SFP+ ports.

Features:

• Weatherproof Enclosure for Outdoor Use
• Powerful Routing or Switching Features
• Fiber Backhaul Capability

The Ubiquiti EdgePoint EP-S16 is the first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.

Breakthrough in Tower Deployment

The Ubiquiti EdgePoint EP-S16 features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.

Purpose-Built for WISP Control

The first application-specific designed WISP control point, the Ubiquiti EdgePoint EP-S16 combines the advanced routing capabilities of EdgeMAX with fiber backhaul and versatile powering capabilities.

Advanced Routing Applications

Powerful routing features – such as link balancing – provide redundancy and increased performance for outdoor wireless links.

All-in-One Design

A single, compact controller efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.

Specifications:

• Dimensions:
  • 326.6 x 382.7 x 88.8 mm (12.86 x 15.07 x 3.50")
  • With Wall-Mount: 326.6 x 382.7 x 105.5 mm (12.86 x 15.07 x 4.15")
• Weight:
  • 3.4 kg (7.50 lb)
  • With Wall-Mount: 3.8 kg (8.38 lb)
• Enclosure Characteristics: Diecast Aluminum Alloy and Polycarbonate with UV Resistance
• Non-Blocking Throughput: 36 Gbps
• Switching Capacity: 72 Gbps
• Forwarding Rate: 53.57 Mpps
• Max. Power Consumption: 40W (Excludes PoE Output)
• Power Input:
  • (1) DC Terminal Block or
  • (2) RJ45 (Ports 1 and 2) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs)
• Power Supply: Min. 54V / 0.8A (Excludes PoE Output Power)
• VDC Input: 54VDC, 6A
• Passive PoE Input:
  • (2) 54V/1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 and 2 (Do NOT Configure Port 1 or 2 in PoE Output Mode if You Are Using PoE Input Power Sources.)
• Passive PoE Output:
  • (4) 54V or 24V /1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 to 4
  • (12) 802.3af/at or 24V/0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, Ports 5 to 16
• Power Monitoring:
  • (1) DC Terminal Block, Input Power
  • (2) RJ45, Ports 1 and 2, PoE Input or Output Power
  • (14) RJ45, Ports 3 to 16, PoE Output Power
• Supported Voltage Range: 56 to 42VDC
• Button: Reset
• LEDs: 
  • System: Power
  • 1 to 16: Speed/Link/Activity, PoE
  • SFP: Speed/Link/Activity
• Ports:
  • Serial Console Port: (1) RJ45 Serial Port
  • Data Ports: (16) 10/100/1000 RJ45 Ports, (2) 1/10 Gbps SFP+ Ports
• Processor: ARM Cortex-A9 400 MHz
• System Memory: 256 MB DDR3 RAM
• Code Storage: 32 MB
• Certifications:
  • CE
  • FCC
  • IC
• Pole/Wall Mount: Yes
• Wind Loading: 153 N @ 200 km/h (34 lbf @ 125 mph)
• Wind Survivability: 200 km/h (125 mph)
• Operating Temperature: -40 to 65° C (-40 to 149° F)
• Operating Humidity: 10 to 90% Noncondensing