Ubiquiti AirFiber 5U 5.9GHz & 6GHz, 1Gbps+, FDD, 100Km+ Point to Point Radio - Single Unit
Ubiquiti AirFiber 5U 5.9GHz & 6GHz, 1Gbps+, FDD, 100Km+ Point to Point Radio - Single Unit
The Ubiquiti airFiber 5U Single Unit is a revolutionary backhaul point-to-point radio in the 5.9 and 6.0GHz frequencies, with a range of up to 100Km+ at incredible 1Gbps+ speeds. The airFiber 5U takes advantage of a new alignment user interface with features such as modulation rate display and local / remote unit RSSI.
Features:
- 1Gbps+ throughput
- 50MHz channel
- Full Duplex
- 100Km+ Range
- Brand new alignment UI
- Industry disruptive price point
Innovative Antenna Design
The high-isolation, dual-antenna design is ideal for robust performance in the harshest RF noise environments.
Revolutionary Performance
Surpassing conventional wired backhauls, the airFiber®5 delivers real throughput of up to 1.2+ Gbps.
Long-Range Links: 100+ km
Designed to be a high-performance backhaul, the airFiber®5 performs at a range of up to 100+ km.
Low-Latency Carrier Backhaul
The airFiber®5 supports FDD (Frequency Division Duplexing) in full-duplex mode for < 1 ms latency, resulting in increased efficiency for carrier-class network backhauls.
5 GHz Unlicensed Band
The airFiber®5 operates in worldwide, license-free, 5 GHz frequencies. Users can deploy airFiber5 almost anywhere they choose (subject to local country regulations).
Specifications:
- Dimensions:
- Radio: 938.4 x 468.4 x 281.4 mm (36.94 x 18.44 x 11.08")
- Box: 1042 x 573 x 502 mm (41.02 x 22.56 x 19.76")
- Weight:
- Radio (Mount Included): 16 kg (35.27 lb)
- Box: 26.5 kg (58.42 lb)
- Max. Power Consumption: 40W
- Power Supply: 50V, 1.2A PoE GigE Adapter (Included)
- Power Method: Passive Power over Ethernet
- Supported Voltage Range: +42 to +58VDC, -48VDC
- Automatic Transmit Power Control (ATPC): Yes
- Certifications: CE, FCC, IC
- Mounting: Pole Mount Kit (Included)
- Wind Loading: 863 N @ 200 km/hr (194 lbf @ 125 mph)
- Wind Survivability: 200 km/hr (125 mph)
- Operating Temperature: -40 to 55° C (-40 to 131°F)
- LEDs (12) Status LEDs:
- Data Port Link/Activity
- Data Port Speed
- Management Port Link/Activity
- Management Port Speed
- GPS Synchronisation
- Master/Slave
- Link Status
- Modulation Mode 0.25x to 4x, 6x, 8x, 10x (Unlabeled), Overload
- Remote and Local Displays (Calibrated Signal Strength)
Operating Frequency
- FCC 15.247, IC RSS-210: 5725 - 5850 MHz
- ETSI EN 302 502: 5725 - 5875 MHz
- Other Regions: 5725 - 6200 MHz
Interface
- Data Port: (1) 10/100/1000 Ethernet Port
- Management Port: (1) 10/100 Ethernet Port
- Auxiliary Port: (1) RJ-12, Alignment Tone Port
System
- Maximum Throughput: 1.2+ Gbps
- Maximum Range: 100+ km (Dependent on Regulatory Region)
- Packets per Second: 1+ Million
- Encryption: 128-Bit AES
- Uplink/Downlink Ratio: 50% Fixed
- Latency:- Full Duplex Mode: < 200 µs at Full Throughput - Half Duplex Mode: < 2 ms at Full Throughput
- Radio Frame Synchronisation: GPS
- Dynamic Frequency Selection: CE (FCC/IC Not Applicable)
- MTU (Maximum Transmission Unit): Up to 9600
Suggested Max. TX Power
- 10x: 39 dBm
- 8x: 43 dBm
- 6x: 45 dBm
- 4x and below: 47 dBm
Radio Frequency
- GPS: GPS Clock Synchronisation
Transceiver
- EIRP: ~50 dBm (Dependent on Regulatory Region and Frequency Band)
- Frequency Accuracy:
- ±2.5 ppm without GPS Synchronisation
- ±0.2 ppm with GPS Synchronisation
- Channel Bandwidth: 10/20/30/40/50 MHz
- Modulation:
- 1024QAM MIMO
- 256QAM MIMO
- 64QAM MIMO
- 16QAM MIMO
- QPSK MIMO
- ½ Rate QPSK xRT
- ¼ Rate QPSK xRT
Integrated Split Antenna
- TX Gain: 23 dBi
- RX Gain: 23 dBi
- Beamwidth: 6°
- Front-to-Back Ratio: 70 dB
- Polarity: Dual-Slant Polarisation
- Cross-Polarity Isolation: > 28 dB