Ubiquiti AirFiber 5U 5.9GHz & 6GHz, 1Gbps+, FDD, 100Km+ Point to Point Radio - Single Unit

Ubiquiti AirFiber 5U 5.9GHz & 6GHz, 1Gbps+, FDD, 100Km+ Point to Point Radio - Single Unit

The Ubiquiti airFiber 5U Single Unit is a revolutionary backhaul point-to-point radio in the 5.9 and 6.0GHz frequencies, with a range of up to 100Km+ at incredible 1Gbps+ speeds. The airFiber 5U takes advantage of a new alignment user interface with features such as modulation rate display and local / remote unit RSSI.

Features:

• 1Gbps+ throughput
• 50MHz channel
• Full Duplex
• 100Km+ Range
• Brand new alignment UI
• Industry disruptive price point

Innovative Antenna Design

The high-isolation, dual-antenna design is ideal for robust performance in the harshest RF noise environments.

Revolutionary Performance

Surpassing conventional wired backhauls, the airFiber®5 delivers real throughput of up to 1.2+ Gbps.

Long-Range Links: 100+ km

Designed to be a high-performance backhaul, the airFiber®5 performs at a range of up to 100+ km.

Low-Latency Carrier Backhaul

The airFiber®5 supports FDD (Frequency Division Duplexing) in full-duplex mode for < 1 ms latency, resulting in increased efficiency for carrier-class network backhauls.

5 GHz Unlicensed Band

The airFiber®5 operates in worldwide, license-free, 5 GHz frequencies. Users can deploy airFiber5 almost anywhere they choose (subject to local country regulations).

Specifications:

• Dimensions:
  • Radio: 938.4 x 468.4 x 281.4 mm (36.94 x 18.44 x 11.08")
  • Box: 1042 x 573 x 502 mm (41.02 x 22.56 x 19.76")
• Weight:
  • Radio (Mount Included): 16 kg (35.27 lb)
  • Box: 26.5 kg (58.42 lb)
• Max. Power Consumption: 40W 
• Power Supply: 50V, 1.2A PoE GigE Adapter (Included) 
• Power Method: Passive Power over Ethernet 
• Supported Voltage Range: +42 to +58VDC, -48VDC 
• Automatic Transmit Power Control (ATPC): Yes 
• Certifications: CE, FCC, IC 
• Mounting: Pole Mount Kit (Included) 
• Wind Loading: 863 N @ 200 km/hr (194 lbf @ 125 mph) 
• Wind Survivability: 200 km/hr (125 mph) 
• Operating Temperature: -40 to 55° C (-40 to 131°F)
• LEDs (12) Status LEDs:
  • Data Port Link/Activity
  • Data Port Speed
  • Management Port Link/Activity
  • Management Port Speed
  • GPS Synchronisation
  • Master/Slave
  • Link Status
  • Modulation Mode 0.25x to 4x, 6x, 8x, 10x (Unlabeled), Overload
  • Remote and Local Displays (Calibrated Signal Strength)

Operating Frequency

• FCC 15.247, IC RSS-210: 5725 - 5850 MHz
• ETSI EN 302 502: 5725 - 5875 MHz
• Other Regions: 5725 - 6200 MHz

Interface

• Data Port: (1) 10/100/1000 Ethernet Port 
• Management Port: (1) 10/100 Ethernet Port 
• Auxiliary Port: (1) RJ-12, Alignment Tone Port

System

• Maximum Throughput: 1.2+ Gbps
• Maximum Range: 100+ km (Dependent on Regulatory Region)
• Packets per Second: 1+ Million 
• Encryption: 128-Bit AES 
• Uplink/Downlink Ratio: 50% Fixed
• Latency:- Full Duplex Mode: < 200 µs at Full Throughput - Half Duplex Mode: < 2 ms at Full Throughput
• Radio Frame Synchronisation: GPS
• Dynamic Frequency Selection: CE (FCC/IC Not Applicable)
• MTU (Maximum Transmission Unit): Up to 9600

Suggested Max. TX Power

• 10x: 39 dBm 
• 8x: 43 dBm 
• 6x: 45 dBm 
• 4x and below: 47 dBm

Radio Frequency

• GPS: GPS Clock Synchronisation

Transceiver

• EIRP: ~50 dBm (Dependent on Regulatory Region and Frequency Band)
• Frequency Accuracy:
  • ±2.5 ppm without GPS Synchronisation
  • ±0.2 ppm with GPS Synchronisation
• Channel Bandwidth: 10/20/30/40/50 MHz
• Modulation:
  • 1024QAM MIMO
  • 256QAM MIMO
  • 64QAM MIMO
  • 16QAM MIMO
  • QPSK MIMO
  • ½ Rate QPSK xRT
  • ¼ Rate QPSK xRT

Integrated Split Antenna

• TX Gain: 23 dBi 
• RX Gain: 23 dBi 
• Beamwidth: 6° 
• Front-to-Back Ratio: 70 dB 
• Polarity: Dual-Slant Polarisation 
• Cross-Polarity Isolation: > 28 dB